- A+
Introduction
Canon MP288 is an all-in-one printer that is widely used for personal and professional printing purposes. However, like any other printer, it also has an ink waste tank that needs to be reset from time to time to ensure the smooth functioning of the printer. In this article, we will discuss the detailed steps to reset the ink waste tank of Canon MP288.
Step-by-Step Guide
Before we begin with the steps, make sure that your Canon MP288 printer is turned off. Now follow the below mentioned steps to reset the ink waste tank:
Locate the Stop/Reset button on your printer. It is usually present at the top left corner of the printer.
Now press and hold the Stop/Reset button for at least 5 seconds and release it when the printer LED starts blinking.
You will now see the screen displaying “Idle”. Press and hold the “Stop/Reset” button again for 5 seconds, and then release it.
Now press “2” and “7” buttons in sequence, followed by the “Menu” button.
Use the arrow keys to navigate to the “(8) PRINTER TEST” menu and press “OK” to select it.
Again use the arrow keys to select the “(3) EEPROM CLEAR” option and press “OK”. Now press “OK” again to confirm the selection.
You will now see a message saying “Waste ink absorber counter has been reset”. Press “OK” to complete the procedure.
Now turn off the printer and then turn it back on. Your printer has now been successfully reset.
Conclusion
Resetting the ink waste tank of Canon MP288 is crucial for its smooth functioning. However, it is essential to follow the steps mentioned above carefully to avoid any damage to the printer. With this guide, you can easily reset the ink waste tank of your Canon MP288 and keep it running efficiently.
